These
units have been used as checks on Infrared Instruments such as
thermometers and cameras.
When power is applied to the Infrared Light Source, the unit heats
and the digital thermometer generates a digital read out of the surface
temperature.
The thermocouple output can also be used as an input to the
power supply system to control the source temperature.
Infrared Calibration System
- HawkEye Technologies IR-12
Series Infrared Source
- Type-K Thermocouple
-
Infrared Calibration Source
(IR-12 /TC):
The
Type-K Thermocouple sensor is fabricated using special limit error
thermocouple wire. The wire is rated at +/- 1.1°C. The sensor is applied
directly to the coil of the Infrared Light Source. High-temperature,
low-expansion material is used to apply the sensor. The thermocouple is
terminated with a standard Type-K ANSI miniature plug.
Digital Thermometer (/DT):
The
calibration source can be plugged directly into this unit.
The meter
accepts all Type-K thermocouple probes with ANSI miniconnectors.
- Features:
- HOLD button to freeze
reading
- Switch for
readouts in °F and °C
- Display has large 1/2"
digital characters
- Measurement
Range -50°C to 1300°C
- Meter comes with 9 volt
battery
- Three and
one half digits