Hawkeye Technologies Logo
 
Contact Us +1-203-878-6892
info@hawkeyetechnologies.com

Specialty

Hawkeye carries several Custom Design and Specialty products:

IR Thermal Source Array

ARRAYS

Some of our emitters can be arranged in different patterns. If you are working on a project of clustering the sources on a mounting platform in different configurations, such as design of an IR beacon or need an IR array for a spectroscopy application. Our engineers will work with you from the design stage to the final mounting and assembly.

Special Built-To-Specs IR Sources

SPECIALTY IR SOURCES

Specialty IR Sources are wire wound supported filament emitters that have stable properties and long life.        

TYPICAL SPECIFICATIONS:

Product Power, W Current, A Voltage, V Radiating Area, mm Temp, °C Source Material
IR-C178 3.18 1.06 3 2.1 x 3.8 850 Kanthal
IR-C174-A 3.98 1.59 2.5 1.74 x 2.75 1030 Kanthal
IR-C198 7.2 1.44 5 3.0 x 4.5 960 Kanthal
IR-C186 7.7 1.54 5 3.0 x 4.5 1000 Kanthal
IR-C181 8.37 1.86 4.5 3.5 x 4.5 950 Kanthal
IR-C257 10.38 1.73 6 3.5 x 3.5 930 Kanthal
IR-C127 33.6 12 2.8 3.5 x 19 950 NiCr
IR-C197 34.21 3.11 11 3.4 x 25 925 NiCr
IR Thermocouple System IR-12/TC IR-12K/TC

IR THERMOCOUPLE SYSTEM:

This infrared thermocouple system (IR-12/TC and IR-12K/TC) consists of a standard IR-12 or IR-12K infrared source, a Type K thermocouple and an optional digital thermometer (IR-DT).

These units have been used as checks on infrared instruments such as thermometers and cameras. When power is applied to the infrared source the unit heats and the digital thermometer generates a digital read out of the surface temperature. The thermocouple output can also be used as an input to the power supply system to control the source temperature.

The Type K thermocouple sensor is fabricated using special limit error thermocouple wire. The wire is rated at ±1.1°C. However the connection between the thermocouple and the IR source causes the difference in readings (about 50° C). The system is designed for tracking the thermal stability of a source.

The sensor is applied directly to the coil of the infrared source. High temperature, low-expansion material is used to apply the sensor. The thermocouple is terminated with a standard Type K ANSI miniature plug.

The thermocouple system can be plugged directly into the digital thermometer. The thermometer also accepts all other Type K thermocouple probes with ANSI mini connectors.

Our parabolic and elliptical reflectors can be used with the Thermocouple Systems.

Please contact us for further information.

If you have specific requests, we will create and customize the design to meet the requirements of your company.